Photocentric 日光树脂3D打印材料(英国)

¥980.00¥1,100.00

Liquid Crystal 3D打印机专用打印树脂材料

(不适用其他SLA/DLP打印机)

Liquid Crystal 3D Printer Polymer Resin

(Not compatible with other SLA/DLP printers)

一次买2支95折;一次买3支或以上9折。
Buy 2 and get 5% off. Buy 3 or more to get 10% off.

清除

描述

Imagepac 3D 日光树脂是专为Photocentric液晶3D打印机而特别配制的聚合物打印材料,大家可以根据需要选用不同类别的产品:

hard-daylight硬度:      弹性:

坚硬(Hard daylight)日光树脂可以打印出极度坚硬并且不会在受力情况下变形的对象。打印完成品会有少量收缩情况。


firm-daylight硬度:      弹性:

坚固(Firm daylight)日光树脂可以打印出非常坚固并只会有极少收缩的对象,但同时间在强大压力或拉力下,它会有轻微的压缩或拉长,然后慢慢变会原状。


flexible-daylight

硬度:        弹性:  

柔软(Flexible daylight)日光树脂适合打印需要有弹性的对象。对象仍然会是坚固的,但如果用力把它挤压或弯曲的话,它会像橡胶一般被压缩及拗弯,然后慢慢变会原状。


castable-daylight硬度:       燃点: 730ºC

可铸(Castable)日光树脂是一款专门为制作高精度模具而配置的树脂材料。当它燃烧时,它不留下任何残渣,并随温度升高而均匀气化,从而避免了铸件内形成任何压力。因此它能表现出任何细节和形成非常光洁的表面,助您制成高精度的模具。

 


 

Imagepac 3D Daylight resin is tailored made for Photocentric Liquid Crystal printers. See below for the different types of resins to fit your needs:

hard-daylightHardness:       Flexibility:

Hard daylight polymers are ideal for making objects where you want a very hard object with no compressive ability under high force. It exhibits shrinkage. Objects will not bend or deflect when under duress. They exhibit very high tensile shear properties and almost no elongation.


firm-daylightHardness:       Flexibility:

Firm daylight polymers are ideal for making objects where you want a very hard object with slight compressive ability under high force and minimal shrinkage. Objects will bend a little and stretch slightly when under duress. They exhibit high tensile shear properties and limited elongation, objects can only be bent and compressed with force.


flexible-daylightHardness:        Flexibility:  

Flexible daylight polymers are ideal for making objects where you want a little flexibility, but still a hard object. Thin objects will compress and deflect enough to bend and return. They exhibit very low tensile shear properties and high elongation, objects can be bent and compressed with some force.

 


castable-daylightHardness:       Burn: 730ºC

Castable daylight resin is specially formulated to provide high definition moulds. It will leave almost no ash when burnt and create gas evenly as the temperature is increased, avoiding any pressure build up within the casting. It will capture all the details with a very dry surface to provide the ideal finish to your investment mould.

NOTE: Not Compatible with other SLA/DLP Printers

 

其他信息

重量 N/A
种类

坚硬(Hard), 坚固(Firm), 柔软(Flexible), 可铸(Castable)

颜色/Color

乳白/Cream, 灰色/Grey, 琥珀色/Amber, 红色/Red, 绿色/Green, 黑色/Black

你可能还会喜欢…